标签归档:DWDM System

Costs of the Comparison in the DWDM and SDH Network Construction

When we choose the fiber optic devices for our fiber optic networks, cost is necessary factor that we have to consider, almost all the consumers want good quality and affordable products for their network, but there is a point we need to know that is not reasonable to judge which costs of system or technology is more expensive only by the fiber optic devices. Therefore, this page will focus on DWDM system and SDH networks.

The fact that channel spacing’s and frequency stability of CWDM results that EDFAs could not be utilized. As though the DWDM can. The DWDM EDFA Booster amplifier?(shown as the figure) is a cost efficient solution for DWMD fiber optic link amplification which operates at the transmission side of the link. SDH EDFA Booster Amplifier?is designed for the SDH applications which installed after the optical transmitter to increase transmission distance for single wavelength optical module system.

dwdm amplifier

As we know, the fiber optic module is integrated EDFA, it is divided into optoelectronic integrated EDFA and optical gain module, which has the characteristics of small size, low power consumption and easy to use. Can be installed in various systems easily according to users requirements, such as SDH frame, CATV machine box and DWDM system chassis. In fact, it is the specific infrastructure not only in DWDM system but also SDH networks. Although DWDM EDFA is more expensive than SDH EDFA from the diagram, can we say that the cost we need for DWDM system application is more expensive? No, the answer is negative.

Product Category Product Model Price
CATV Booster Amplifiers CATV-EDFA-BA-24 US$ 1,625.00
CATV-EDFA-BA-23 US$ 1,387.00
CATV-EDFA-BA-22 US$ 1,300.00
CATV-EDFA-BA-21 US$ 1,213.00
CATV-EDFA-BA-20 US$ 1,148.00
CATV-EDFA-BA-19 US$ 1,105.00
CATV-EDFA-BA-18 US$ 1,062.00
CATV-EDFA-BA-17 US$ 1,018.00
CATV-EDFA-BA-16 US$ 975.00
CATV-EDFA-BA-15 US$ 932.00
CATV-EDFA-BA-14 US$ 888.00
CATV-EDFA-BA-13 US$ 845.00
SDH Booster Amplifiers SDH-EDFA-BA-O20 US$ 1,517.00
SDH-EDFA-BA-O10 US$ 1,062.00
SDH-EDFA-BA-O6 US$ 975.00
SDH-EDFA-LA-O20 US$ 1,733.00
SDH-EDFA-LA-O10 US$ 1,408.00
SDH-EDFA-LA-O6 US$ 1,127.00
SDH-EDFA-PA-G30 US$ 1,473.00
SDH-EDFA-PA-G20 US$ 1,300.00
SDH-EDFA-PA-G16 US$ 1,127.00
DWDM Booster Amplifiers DWDM-EDFA-BA-O23 US$ 3,683.00
DWDM-EDFA-BA-O22 US$ 2,665.00
DWDM-EDFA-BA-O21 US$ 2,492.00
DWDM-EDFA-BA-O20 US$ 2,383.00
DWDM-EDFA-BA-O19 US$ 1,820.00
DWDM-EDFA-BA-O18 US$ 1,733.00
DWDM-EDFA-BA-O16 US$ 1,625.00
DWDM-EDFA-BA-O17 US$ 1,690.00
DWDM-EDFA-BA-O15 US$ 1,517.00
DWDM-EDFA-BA-O14 US$ 1,300.00
DWDM-EDFA-BA-O13 US$ 1,408.00

DWDM are technologies that improve the capability of optical cable in carrying data by multiplexing many channels of wavelengths, and SDH are technologies that are used as a buffer interfacing layer for higher layers access the huge capability of Optical transmission system. DWDM is multiple signal transmit over a single fiber called DWDM or Different frequencies (colors/wavelengths/lambdas) for different connections over the single fibre. Full featured DWDM equipment can comprise the same range of cards as SDH. They can support fully configurable cross connect features. DWDM technology provides very high bandwidth long haul inter-connect links. Let’s say in microwave or fiber of point to point terms, SDH equipment is used when you need to connect several site/clients towards star topology. It is conventional TDM based and traffic is dropped and collected in SDH and rerouted towards desired point destination in form of electrical or light signals. Where as DWDM is mostly used at the core and is of fiber, traffic gathered from different equipments (SDH or others) and transported over fiber for analyzing billing or interpretation.

Due to the different characteristics between DWDM and SDH and then they cannot be compared logically. A DWDM ring may be equivalent to 40 SDH rings. But we can compare two rings of different capacities. Well, the only cost savings we will notice is that on the same fiber, we will be able to send multiple lambdas (SDH equipments / routers), using DWDM. SDH costs will be the same and you will add DWDM systems costs, maybe tens or hundreds of thousands of dollars and it all depends on the complexity. If you do not use DWDM, you will have to install more fibers for each SDH link. Well, fiber installation costs are high and they depend on the distance and geography. If the operators could transport the data using only SDH which would imply bigger costs for fiber infrastructure, more power consumption. In fact, there are also so many other elements in the network that for monitoring the network, more workers would be needed, they are both in monitoring and field intervention. Except this, DWDM systems are usually more reliable than SDH. So maybe the cost of maintenance would be cheaper. However, you need to keep in mind that DWDM systems amplification can save the use of many SDH repeaters or regenerator. In a word, if you wonder that which infrastructure costs are more reasonable, judge not only by the devices’cost, you need a combination of various factors to have a decision.

CWDM/DWDM detailed analysis and related solution of the problem

WDM refers to the process of multiplexing optical signals onto a single fiber. Each optical signal is called a lambda. It typically falls into the 1500-1600 nanometer(nm) range. This range is called the WDM window. WDM allows existing networks to scale in bandwidth without requiring additional fiber pairs. This can reduce the recurring cost of operations for metropolitan-and wide-area networks significantly by deferring fiber installation costs. WDM can also enable solutions otherwise impossible to implement in situations where additional fiber installation is not possible.

Wavelength and frequency are bound by the following formula:

                                   C = wavelength * frequency

Where C stands for constant and refers to the speed of light in a vacuum; therefore wavelength cannot be changed without also changing frequency. Because of this, many people confuse WDM with frequency division multiplexing(FDM). Two factors distinguish WDM from FDM. First, FDM generally describes older multiplexing systems that process electrical signals. WDM refers to newer multiplexing systems that process optical signals. Second, each frequency multiplexed in an FDM system represents a single transmission source. Bycontrast, one of the primary WDM applications is the multiplexing of SONET signals, each of which may carry multiple transmissions from multiple sources via TDM. So, WDM combines TDM and FDM techniques to achieve higher bandwidth utilization.

DWDM refers to closely spaced wavelengths; the closer the spacing, the higher the number of channels(bandwidth) per fiber. The International Telecommunication Union(ITU) G.694.1 standard establishes nominal wavelength spacing for DWDM system. Spacing options are specified via a frequency grid ranging from 12.5 gigahertz(GHz), which equates to approximately 0.1 nm, to 100 GHz, which is approximately 0.8 nm. Many DWDM systems historically have supported only 100 GHz spacing(or a multiple of 100 GHz) because of technical challenges associated with closer spacing. Newer DWDM systems support spacing close than 100 GHz. current products typically support transmission rates of 2.5-10 Gbps, and the 40-Gbps market is expected to emerge in 2006.

You can use two methods to transmit through a DWDM system. One of the methods is transparent. This means that the DWDM system will accept any client signal withou special protocol mappings or frame encapsulation techniques. Using this method, a client device is connected to a transparent interface in the DWDM equipment. The DWDM devices accept the client is optical signal and shift the wavelength into the WDM window. The shifted optical signal is then multiplexed with other shifted signals onto a DWDM trunk. Some DWDM-transparent interfaces can accept abroad range of optical signals, whereas others can accept only a narrow range. Some DWDM-transparent interfaces are protocol aware, meaning that the interface understands the client protocol and can monitor the client signal. When using the transparent method, the entire end-to-end DWDM infrastructure is invisible to the client. All link-level operations are conducted end-to-end through the DWDM infrastructure.

Using the second method, a client dvice is connected to a native interface in the DWDM equipment. Fow example, a Fibre Channel switch port is connected to a Fibre Channel port on a line card in a DWDM chassis. The DWDM device terminates the incoming client signal by supporting the client is protocol and actively participating as an end node o n the client is network. For example, a Fibre Channel port in a DWDM device would exchange low-level Fibre channel signals with a Fibre Channel switch and would appear as a brdge potr(B_Port) to the Fibre Channel switch. This non-transparent DWDM transport service has the benefit of localizing some or all link-level operations on each side of the DWDM infrastructure. Non-transparent DWDM service also permits aggregation at the point of ingress into the DWDM network. For examle, eight 1-Gbps Ethernet(GE) ports culd be aggregated onto a single 1–Gbps lambda. The DWDM device must generate a new optical signal for each client signal that it terminates. The DWDM device must generate a new optical signal for each client signal that it terminates. The newly generated optical signals are in the WDM widow and are multiplexed onto a DWDM trunk. Non-transparent DWDM service also supports monitoring of the client protocol signals.

 

30

 

To the extent that client devices are unaware of the CWDM system, and all link-level operations are conducted end-to-end, transparent CWDM service is essentially the same as transparent DWDM service. Transparent CWDM mux/demux equipment is typically passive(not powered). Passive devices cannot generate or repeat optical signals. Additionally, 10As operate in a small wavelength range that overlaps only three CWDM signals. Some CWDM signals are unaffected by 10As, so each CWDM span must terminate at a distance determined by the unamplified signals. Therefore, no benefit is realized by amplifying any of the CWDMsignals. This means that all optical signal loss introduced by CWDM mux demux equipment, splices, connectors, and the fiber must be subtracted from the launch power of the colored GBIC/SFP installed in the client. Thus, the client GBIC/SFP determines the theoretical maximum distance that can be traversed. Colored GBICs/SFPs typically are limited to 80 km in a point-to-point configuration, but may reach up to 120 km under ideal conditions. Signal monitoring typically is not implemented in CWDM devices.

DWDM vs CWDM the most effective method

Within today’s globe associated with rigorous conversation requirements as well as needs, “fiber optic cabling” has turned into a extremely popular expression. In neuro-scientific telecoms, information middle online connectivity as well as, movie transportation, dietary fiber optic wiring is actually extremely appealing with regard to today’s conversation requirements because of the huge bandwidth accessibility, in addition to dependability, minimum lack of information packets, reduced latency as well as elevated protection. Because the bodily dietary fiber optic wiring is actually costly in order to put into action for every person support, utilizing a Wavelength Department Multiplexing (WDM) with regard to growing the capability from the dietary fiber to transport several customer interfaces is really a extremely recommended. WDM is really a technologies which brings together a number of channels associated with data/storage/video or even tone of voice methods on a single bodily fiber-optic cable television by utilizing a number of wavelengths (frequencies) associated with gentle along with every rate of recurrence transporting another kind of information. By using optical amplifiers and also the improvement from the OTN (DWDM System) coating designed with FEC (Ahead Mistake Corection), the length from the dietary fiber optical conversation may achieve a large number of Kms with no need with regard to regeneration websites.
CWDM VS DWDM
DWDM (Dense Wavelength Division Multiplexing) is a technology allowing high throughput capacity over longer distances commonly ranging between 44-88 channels/wavelengths and transferring data rates from 100Mbps up to 100Gbps per wavelength. Each wavelength can transparently carry wide range of services such as FE/1/10/40/100GBE, OTU2/OTU3/OTU4, 1/2/4/8/10/16GB FC,STM1/4/16/64, OC3/OC12/OC48/OC-192, HD/SD-SDI and CPRI. The channel spacing of the DWDM solution is defined by the ITU.xxx (ask Omri) standard and can range from 25Ghz, 50GHz and 100GHz which is the most widely used today. Figure – 1 shows a DWDM spectral view of 88ch with 50GHz spacing.

Figure -1: Spectral view of 50GHz spacing 88 DWDM channels/wavelengths
DWDM systems can offer as much as ninety six wavelengths (from 50GHz) associated with combined support kinds, and may transportation in order to miles as much as 3000km through implementing amplifiers, because shown within determine two) as well as distribution compensators therefore growing the actual dietary fiber capability with a element associated with x100. Because of its much more exact as well as stable lasers, the actual DWDM technologies is commonly more costly in the sub-10G prices, however is really a appropriate answer and it is ruling with regard to 10G support prices as well as over supplying big capability information transportation as well as online connectivity more than lengthy miles from inexpensive expenses. The actual DWDM answer these days is usually inlayed along with ROADM (Reconfigurable Optical Add Drop Multiplexer) that allows the actual creating associated with versatile remotely handled national infrastructure by which any kind of wavelength could be additional or even fallen from any kind of website. A good example of DWDM gear is actually nicely shown through PL-1000, PL-1000GM, PL-1000GT, PL-1000RO, PL-2000 as well as PL-1000TN through DK Photonics Systems.
Figure-2 Optical amplifier used in DWDM solution to overcome fiber attenuation and increase distance
CWDM (Coarse Wavelength Division Multiplexing) proves to be the initial entry point for many organizations due to its lower cost. Each CWDM wavelength typically supports up to 2.5Gbps and can be expanded to 10Gbps support. This transfer rate is sufficient to support GbE, Fast Ethernet or 1/2/4/8/10G FC, STM-1/STM-4/STM-16 / OC3/OC12/OC48, as well as other protocols. The CWDM is limited to 16 wavelengths and is typically deployed at networks up to 80Km since optical amplifiers cannot be used due to the large spacing between channels. An example of this equipment is well demonstrated by PL-400, PL-1000E and PL-2000 by DK Photonics Networks.
You will need to remember that the complete selection regarding DK Photonics’ products was created to help equally DWDM and also CWDM engineering through the use of specifications centered pluggable optical web template modules for instance SFP, XFP and also SFP+. The particular engineering employed will be cautiously computed every venture and also in accordance with consumer specifications regarding length, ability, attenuation and also upcoming wants. DK Photonics furthermore gives migration way coming from CWDM to be able to DWDM permitting lower access expense and also upcoming enlargement which can be looked at inside the DWDM above CWDM engineering site.