Single Mode Fiber Patch Panel vs Multimode Fiber Patch Panel

Cable management is the obvious factor of using fiber patch panel. For now, the amount of data that needs to be stored especially in data center has greatly increased and continues to grow, thus there are thousands of fiber connections in data centers, and technical staff needs a high-density solution which can properly deal with the different cables that vary form single mode to multimode. Thus single mode and multimode fiber patch panel are introduced to connecting the matched fiber cables. For single mode and multimode fiber optic enclosure, which one is better? Read this article and find the answer.

Importance of Using Single Mode and Multimode Fiber Patch Panel

Single mode fiber cables should be connected to the single mode fiber patch panel, while the same as the multimode one. This is necessary, because, single mode and multimode fiber cables require different transmission media and paths. Single mode cable needs special laser light transmitter while the transmitter of multimode fiber is the inexpensive LED light source. If not, like using single mode enclosure to connect the multimode fiber cables, this may lead to network failure. Therefore, using the right fiber patch panel is critical for network’s stability, maintenance and operation, as well as decreasing the total cost of ownership.

Difference Between Single Mode and Multimode Fiber Patch Panel

Obviously, the two fiber patch panels are used for different fiber cables, as stated in above content. Besides, the connector colors of both fiber patch panels are different. Single mode fiber patch panel usually takes aqua design while the multimode one is blue. Thus a quick look at the fiber patch panel may tell users which fiber cable should be connected to the security device.

Choose Single Mode or Multimode Fiber Patch Panel?

The product 48 Fibers, 24 Ports LC Duplex OS2 Single Mode Adapters, 1U High 19″ Fiber Patch Panel offered by FS.COM is designed for OS2. The connectors are blue. This fiber patch panel uses 1.5mm SPCC material with black coating and can be mounted in a 19″ network rack.

single mode fiber patch panel

Product 48 Fibers, 24 Ports LC Duplex OM3/OM4 Multimode Adapters, 1U High 19″ Fiber Patch Panel serves as standard 1U 19″ rack, ODF and cabinets. The connectors are aqua used for connecting OM3 and OM4 with a design of 1.5mm SPCC.

multimode fiber patch panel

From the above, we know the two fiber patch panel share the same material, size and connector, but for connecting different fiber cables. So choose one just based on your own need. Remember, what suits you is the best.

Conclusion

The main effect of today’s electronic equipment comes from the ability of interconnection, and this can be simplified by using a single mode fiber patch panel or multimode fiber patch panel. Both of them can help technicians improve data center environment through making changes on the patching field instead of cable routing. FS.COM is an international supplier of high quality, cost-effective fiber patch panels.